Prezzo:150 €
Comune:Valle Lomellina (PV)
Tipologia:Altro
Vendo oscilloscopio doppia traccia 20mhz Protek P3502C.
Perfettamente funzionante in ottimo stato.
Completo di sonde.
Caratteristiche:
VerticAmplifier (CH 1 and CH 2)
Sensitivity 5mV/Div to 5V/Div in 10 steps (1-2-5 seq)
X5 Mag: 1mV/Div to 1V/Div
Accuracy ±3% (±5% in X5 Mag)
Bandwith(-3dB) DC to 60MHz
Rise Time
Input Impedance 1MW + 25pF
Input Coupling AC-Gnd-DC
Invert Channel CH2
Display Modes CH1, CH2, Add, Du
Chop Frequency 250kHz ±3%
Maximum Input Voltage 400V (DC or AC peak)
CH1 SignOutput 20mV into 50W: (50Hz to 5MHz)
HorizontSweep
Sweep Time 0.1µs/Div to 0.2s/Div in 20 calibrated steps (1-2-5)
X10 Mag: 10ns/Div to 20ms/Div
Accuracy ±3% (±5% in X10 Mag)
Display Mode A, Alt-Mag, XY Du
Sweep Magnifier X10 ±5%
Trace Sep 1.5 Div Min
HorizontAmplifier
Linearity ±3% (±5% in X10 Mag)
X-Y Mode CH 1-X axis, CH 2-Y axis
Sensitivity Same as CH 1 VerticAmplifier
Bandwidth DC: DC to 500kHz
AC: 10Hz to 500kHz
Phase Error £ 3° DC to 50kHz
Triggering
Source CH 1, CH 2, Line, EXT
Coupling AC
Modes Auto, Norm, TV-V, TV-H
Slope Positive or Negative
Trigger Sensitivity Int: DC to 5MHz: 0.5 Div
5MHz to 40MHz: 1.5 Div; 40MHz to 60MHz: 2.5 Div
Ext: DC to 5MHz: 200mV P-P
5MHz to 40MHz: 800mV P-P
40MHz to 60MHz: 1V P-P
TV: Int: 1 Div Min; Ext: 1 V P-P Min
TV-H (Television Line synchronizing Freq)
TV-V (Television Frame synchronizing Freq)
Automatically switched by the A Time/Div Front panel control
ExternTrigger Input Impedance: 1MW + 20 pF
Maximum Input Volts: 300V (DC or AC peak)
Z Axis Modulation
Sensitivity ±5V P-P Intensity increases with a negative going voltage input
Bandwidth (-3dB) DC to 2MHz
Input Impedance Approx. 33 KW
Maximum Input Voltage 30V (DC or AC peak)
Calibrator Sign
Frequency Approx. 1kHz (±20%)
Voltage 0.5V P-P ±3%
Duty Cycle Approx. 50%
CRT
Type 6" rectangular CRT with illuminated internX 10 Div graticule (1 Div = 1cm)
Acceleration Voltage 10 kV
GenerSpecification
Indicaci il motivo per cui vuoi segnalare questo annuncio:
Grazie per averci aiutato a far rispettare le regole di pubblicazione degli Messaggio.